document number: 36023 for technical questions, contact: connectors@vishay.com www.vishay.com revision: 27-mar-07 1 printed circuit dip solder connector series 300 vishay dale applications where permanent mounting of male connector to printed circuit board is required with mating female connector available. electrical specifications current rating: 7.5 a breakdown voltage: at sea level: 3600 v rms at 70 000 feet: 975 v rms features ? right angle or straight through dip solder terminals ? threaded mounting studs ? male contacts molded in ? mating connector has solder cup or dip solder terminals ? female contacts float to aid in alignment and resist vibration ? permanent mounting provides greater reliability ? polarization provided by co ntact arrangement and guide pin location ? meets applicable paragraphs of mil-c-55302 material specifications contact pin: phosphor bronze contact socket: phosphor bronze contact plating: gold plated guide pins: stainless steel, passivated standard body: glass-filled diallyl phthalate per mil-m-14, type sdg-f green. other body material supplied upon request physical specifications number of contacts: 7, 15, 19 and 25 contact spacing: 0.250", staggered rows provide a 0.125" grid contact gauge: #20 awg minimum creepage path between contacts: 0.16" minimum air spaceb etween contacts: 0.11" dimensions in inches (millimeters) 2.150 + 0.015/- 0.000 b c a d e f h b c a d e f h j k l m n p r s b c a d e f h j k l m n p r s t u v w bb z y x w v u t s r p n m l k j h f e d a c b aa cc 3/16 [4.76] 1.150 + 0.015/- 0.000 [29.200 + 0.381/- 0.000] 1.450 + 0.015/- 0.000 [36.800 + 0.381/-0.000] (0.750) ([19.0]) 0.36 [9.14] 7 contacts 0.125 0.003 [3.180 0.076] 15 contacts 19 contacts 25 contacts [54.600 + 0.381/- 0.000] 2.450 + 0.015/- 0.000 [62.200 + 0.381/- 0.000] [9.14] 0.36 (1.750) ([44.4]) 0.36 [9.14] 2.650 + 0.015/- 0.000 [67.300 + 0.381/- 0.000] 2.950 + 0.015/- 0.000 [74.900 + 0.381/- 0.000] [9.14] 0.36 (2.250) ([57.2]) 3.400 + 0.015/- 0.000 [86.400 + 0.381/- 0.000] 3.700 + 0.015/- 0.000 [94.000 + 0.381/- 0.000] (3.000) ([76.2]) 0.453 [11.5] 0.200 [5.08] [5.08] 0.200 0.010 0.181 [4.60] 0.242 [6.15] 0.06 [1.52] (typ.) 7/64 [2.78] 7/64 [2.78] (typ.) 0.06 [1.52] 0.242 [6.15] 0.181 [4.60] [3.180 0.076] 0.125 0.003 4-40 u n c 2a (typ.) (typ.) 4-40 u n c 2a 7/64 [2.78] 4-40 u n c 2a (typ.) 0.125 0.003 [3.180 0.076] 0.181 [4.60] 0.242 [6.15] 0.06 [1.52] (typ.) 7/64 [2.78] (typ.) 0.06 [1.52] 0.242 [6.15] 0.181 [4.60] [3.180 0.076] 0.125 0.003 (typ.) 4-40 u n c 2a 0.125 0.003 [3.180 0.076] (typ.) 0.220 [5.59] 0.032 [0.813] (typ.) 0.125 0.002 [3.180 0.051] 0.300 [7.62] 15/64 [5.95] ? 0.040 [1.02] (typ.) co n tact pi n ? 0.093 [2.36] (typ.) guide pi n typical side view 300pr
www.vishay.com for technical questions, contact: connectors@vishay.com document number: 36023 2 revision: 27-mar-07 series 300 vishay dale printed circuit dip solder connector dimensions in inches (millimeters) a b c d e f h j k l m n p r s t u v w a b c d e f h j k l m n p r s t u v w x y z aa bb cc s r p n m l k j h f e d c b a h f e d c b a "a" 1.150 + 0.015/- 0.000 [29.200 + 0.381/- 0.000] 1.450 + 0.015/- 0.000 [36.800 + 0.381/- 0.000] (0.750) ([19.0]) 0.36 [9.14] 7 contacts 0.117 [2.97] 0.125 0.003 [3.180 0.076] 15 contacts 19 contacts 25 contacts 2.150 + 0.015/- 0.000 [54.600 + 0.381/- 0.000] 2.450 + 0.015/- 0.000 [62.200 + 0.381/- 0.000] [9.14] 0.36 (1.750) ([44.4]) [3.180 0.076] 0.125 0.003 [2.97] 0.117 0.36 [9.14] 0.117 [2.97] 0.125 0.003 [3.180 0.076] 2.650 + 0.015/- 0.000 [67.300 + 0.381/- 0.000] 2.950 + 0.015/- 0.000 [74.900 + 0.381/- 0.000] [9.14] 0.36 [3.180 0.076] 0.125 0.003 [2.97] 0.117 (2.250) ([57.2]) 3.400 + 0.015/- 0.000 [86.400 + 0.381/- 0.000] 3.700 + 0.015/- 0.000 [94.000 + 0.381/- 0.000] (3.000) ([76.2]) 3/32 [2.38] 0.453 [11.5] 0.200 [5.08] [5.08] 0.200 0.125 0.003 [3.180 0.076] (typ.) typical side view 0.010 guide socket 4-40 u n c 2a (typ.) 3/16 [4.76] hex n ut (typ.) 0.06 [1.52] (typ.) ? 0.156 [3.96] (2 plcs.) 0.125 [3.18] (typ.) 0.125 [3.18] 0.375 [9.52] mi n . "b" 0.010 [ 0.254] "c" panel cutout 1/32 [0.794] r. (typ.) r. (typ.) 5/16 [7.94] ? 0.046 [1.17] solder cup #20 a w g (typ.) 300s a b c d e f h j k l m n p r s t u v w a b c d e f h j k l m n p r s t u v w x y z aa bb cc s r p n m l k j h f e d c b a h f e d c b a 1.150 + 0.015/- 0.000 [29.200 + 0.381/- 0.000] 1.450 + 0.015/- 0.000 [36.800 + 0.381/- 0.000] (0.750) ([19.0]) 0.36 [9.14] 7 contacts 0.117 [2.97] 0.125 0.003 [3.180 0.076] 15 contacts 19 contacts 25 contacts 2.150 + 0.015/- 0.000 [54.600 + 0.381/- 0.000] 2.450 + 0.015/- 0.000 [62.200 + 0.381/- 0.000] [9.14] 0.36 (1.750) ([44.4]) [3.180 0.076] 0.125 0.003 [2.97] 0.117 0.36 [9.14] 0.117 [2.97] 0.125 0.003 [3.180 0.076] 2.650 + 0.015/- 0.000 [67.300 + 0.381/- 0.000] 2.950 + 0.015/- 0.000 [74.900 + 0.381/- 0.000] [9.14] 0.36 [3.180 0.076] 0.125 0.003 [2.97] 0.117 (2.250) ([57.2]) 3.400 + 0.015/- 0.000 [86.400 + 0.381/- 0.000] 3.700 + 0.015/- 0.000 [94.000 + 0.381/- 0.000] (3.000) ([76.2]) 3/32 [2.38] 0.453 [11.5] 7/32 [5.56] 1/8 [3.18] 0.200 [5.08] [5.08] 0.200 0.125 0.003 [3.180 0.076] (typ.) typical side view 0.010 guide socket 4-40 u n c 2a (typ.) 3/16 [4.76] hex n ut (typ.) 0.06 [1.52] (typ.) ? 0.032 [0.813] (typ.) ? 0.156 [3.96] (2 plcs.) 0.125 [3.18] (typ.) 0.125 [3.18] 0.375 [9.52] mi n . "b" 0.010 [ 0.254] "a" "c" panel cutout 1/32 [0.794] r. (typ.) r. (typ.) 300se
document number: 36023 for technical questions, contact: connectors@vishay.com www.vishay.com revision: 27-mar-07 3 series 300 printed circuit dip solder connector vishay dale ordering information 300 pr -7 w model contacts number of contacts without guides s = socket with solder cup pe = pin with dip solder terminals se = socket with dip solder terminals pr = pin with right angle dip solder terminals (optional on s, pe, and se models only) dimensions in inches (millimeters) a b d c f e h e f c d b a s h j l k n m r p p r m n k l j h w a b d c f e s t u v v u t s e f c d b a w h j l k n m r p u v u v u v (0.750) ([19.05]) ? 0.093 [? 2.36] (typ.) 0.06 [1.52] (typ.) 0.032 (typ.) [? 0.813] 0.125 0.003 [3.18 0.08] (typ.) 0.200 [5.08] (typ.) 1/8 [3.18] 3/16 [4.76] 15/64 [5.95] 0.453 [11.5] 7/32 [5.56] ? 0.040 [? 1.02] (typ.) 3/16 hex n ut [4.76] (typ.) 4-40 u n c 2a (typ.) 0.010 0.36 [9.14] 7 contacts 1.150 + 0.015/- 0.000 [29.21 + 0.38/- 0.00] 1.450 + 0.015/- 0.005 [36.83 + 0.38/- 0.13] 0.125 0.003 [3.18 0.08] 0.117 [2.97] [2.97] 0.117 [3.18 0.08] 0.125 0.003 [62.23 + 0.38/- 0.13] 2.450 + 0.015/- 0.005 [54.61 + 0.38/- 0.00] 2.150 + 0.015/- 0.000 15 contacts [9.14] 0.36 ([44.45]) (1.750) (2.250) ([57.15]) 0.36 [9.14] 19 contacts 2.650 + 0.015/- 0.000 [67.31 + 0.38/- 0.00] 2.950 + 0.015/- 0.005 [74.93 + 0.38/- 0.13] 0.125 0.003 [3.18 0.08] 0.117 [2.97] [2.97] 0.117 [3.18 0.08] 0.125 0.003 [93.98 + 0.38/- 0.13] 3.700 + 0.015/- 0.005 [86.36 + 0.38/- 0.00] 3.400 + 0.015/- 0.000 25 contacts [9.14] 0.36 ([76.20]) (3.000) typical side view 300pe
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
